Raid 5 Error

Language, region, time zone, power, navigation, notification and more.
Locked
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Raid 5 Error

Post by Fionn »

Hi Team

Have some issues with raid as it seems its stuck on Configuring… 0%

Model F4-210
TOS version 4.2.31-2203011629

Following has been done:
Disk 1: SSD - for a small database. Has not been altered in any way. Single disk config
Disk 2: HDD 12TB with ~7,2TB used from 11TB available. Single disk config
Disk 3: Empty
Disk 4: Empty

In disk3+4 a 10TB HDD has been added and a raid 1 was created from 0. It took about a day to complete. Progress has been updated all the time. Was a somewhat heavy load for the NAS CPU (70-90% usage).
Rsync from the TOS Desktop has been used to copy all data from HDD 2 to the new raid. Took about 2 days (why was it this slow? this is like 40MB/sec transfer rate). Was a somewhat heavy load for the CPU as well as before.
Once all data has been copied a new share was added to the new raid. Works perfectly. All files available.
Disk 2 (12TB HDD) has been removed from the NAS physically.
A new 10TB disk has been added into Disk Slot 2
The raid 1 setup in slot 3+4 has been expanded to a raid 5 with the new disk.
As the old storage pool for the 12TB HDD is useless now it has been deleted after the volume has been removed.

This was done about 8 hrs ago but it looks like the progress bar is not updating properly and NAS CPU usage is worst case 5-10%

CPU usage 7.52%
CPU temperature 42 ℃
Disk temperature 41 ℃

If there would be a load on the CPU I would assume its doing something. What now? :) Thanks for the help.
Desktop_TOS_Mozilla_Firefox1.png
Desktop_TOS_Mozilla_Firefox1.png (21.63 KiB) Viewed 1070 times
Desktop_TOS_Mozilla_Firefox.png
User avatar
TMtina
TerraMaster Team
Posts: 106
Joined: 01 Nov 2022, 18:00

Re: Raid 5 Error

Post by TMtina »

You can log in to ssh and run the cat /proc/mdstat command to check whether the array is synchronizing. Perhaps a part of the disk is synchronizing slowly.
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Re: Raid 5 Error

Post by Fionn »

Thank you for the feedback.

Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multi path] [faulty]
md3 : active raid5 sdf4[2] sde4[0] sdd4[1]
9761010688 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
[>....................] reshape = 0.0% (3929088/9761010688) finish=31507 2426.6min speed=0K/sec
bitmap: 0/73 pages [0KB], 65536KB chunk

md1 : active raid1 sdc4[0]
11713459200 blocks super 1.2 [1/1]
bitmap: 1/88 pages [4KB], 65536KB chunk

md0 : active raid1 sda4[0]
119674880 blocks super 1.2 [1/1]
bitmap: 0/1 pages [0KB], 65536KB chunk

md8 : active raid1 sdf3[25] sdd3[27] sde3[26] sda3[24]
1997824 blocks super 1.2 [24/3] [_UUU____________________]
resync=DELAYED

md9 : active raid1 sdf2[26] sdd2[25] sde2[24] sda2[0]
2998208 blocks super 1.2 [24/4] [UUUU____________________]

unused devices: <none>

Seems stuck
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Re: Raid 5 Error

Post by Fionn »

2hrs later still the same:

Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty]
md3 : active raid5 sdf4[2] sde4[0] sdd4[1]
9761010688 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
[>....................] reshape = 0.0% (3929088 (did not move)/9761010688) finish=315072426.6min (thats 599.055357 years :D) speed=0K/sec
bitmap: 0/73 pages [0KB], 65536KB chunk
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Re: Raid 5 Error

Post by Fionn »

Still unchanged, any ideas?
User avatar
TMzethar
TerraMaster Team
Posts: 1223
Joined: 27 Oct 2020, 16:43

Re: Raid 5 Error

Post by TMzethar »

It seems that the deletion of storage pool 2 and volume 2 has not been completely completed. You can try again after restarting. If you still have problems, please contact the technical support team or the customer service window, and let the engineer help you adjust it.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Re: Raid 5 Error

Post by Fionn »

TMzethar wrote: 25 Jul 2023, 20:05 It seems that the deletion of storage pool 2 and volume 2 has not been completely completed. You can try again after restarting. If you still have problems, please contact the technical support team or the customer service window, and let the engineer help you adjust it.
Hi TMzethar

Thanks for the suggestion. I did a reboot.
Deleting the storage pool vanished, and the rebuild started :)
Desktop - TOS – Mozilla Firefox.png
Will be complete in 4 days (waaaaaaaaay better than 599 years :D)
md3 : active raid5 sdd4[0] sdc4[2] sde4[1]
9761010688 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
[>....................] reshape = 0.2% (20751336/9761010688) finish=5668.2min speed=28639K/sec
bitmap: 0/73 pages [0KB], 65536KB chunk
Thanks for the help, I think from now on it will be fine.

Thank you!
User avatar
Fionn
Posts: 16
Joined: 24 May 2022, 23:05

Re: Raid 5 Error

Post by Fionn »

Completed fine, everything works as planned :) Thanks again.
Locked

Return to “System Configuration”