F4-210 slow file read

[jl434]

Hi,

I have F4-210 (1G) with 2 * Seagate IronWolf 4T running in RAID0, it can reach 110 MB/s write to F4-210 for single large file (50G); however, it is only around 50 MB/s read for the same file from the NAS.

[TMroy]

May I know what file service you used?

[jl434]

May I know what file service you used?

Hi TMroy,

SMB

[TMroy]

This lower than the normal rate, there are many facts which can lead to low rate. Please check it our refer to below article.
viewtopic.php?f=75&t=527

[jl434]

This lower than the normal rate, there are many facts which can lead to low rate. Please check it our refer to below article.
viewtopic.php?f=75&t=527

Hi TMroy,

I used the CAT6 cable directly connect to F4-210, but no different: write: around 110 MB/s, read: around 50 MB/s
I checked both IronWolf hard drives, they are healthy.

[jl434]

btw, I did test in two different computers, both with gigabyte network adaptor, but no different for the read (around 50 MB/s)

[TMroy]

Thank you for your information. We will try to duplicate your case here and will let your know.