I currently have two TerraMaster NAS's on my local network. One has an IP address of 192.168.0195 and the other 192.168.0.194.
I have successfully connected a CyberPower UPS to the NAS at address 192.168.0.194 and TOS 4.2.39 recognizes it. My question is about the "Network UPS Server" option. If I understand correctly if I add the IP address of the other NAS (192.168.0.195) to the permitted devices list then both NAS's will be safely shutdown in the event of a power loss.
Now my question - should I add ONLY the IP address of the NAS not directly connected to the UPS or should I add both IP addresses?? Hopefully I explained myself correctly.
Thank you . . .
Network UPS Server
- Gandalf1369
- Posts: 82
- Joined: 26 Feb 2020, 01:34
Network UPS Server
F5-221 with 4x5TB drives in Raid 5 (Plex Media Server, TOS 4.2.44)
F4-220 with 2x8TB, 1x6TB in JBOD (Docker, PiHole, Uptime-Kuma, tnfsd-x64, TOS 5.1.123)
F4-220 with 2x8TB, 1x6TB in JBOD (Docker, PiHole, Uptime-Kuma, tnfsd-x64, TOS 5.1.123)
Re: Network UPS Server
You only need to add the IP of another nas to the allowed devices.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)