went from 4.2.27 -> 4.2.32 SMB sharing doesn't work with windows 10
- Overclocked
- Posts: 5
- Joined: 30 Jun 2021, 03:45
went from 4.2.27 -> 4.2.32 SMB sharing doesn't work with windows 10
After The update im getting error codes when trying to send a file from my windows 10 pc to the external drives plugged into the F2-420 NAS.This happens specifically when transferring from/to the external usb drive i have plugged into the nas. When i try sending/receiving to the onboard NAS 2 drives it works without a problem. Plex on another unite still reads the files on the external drive just fine. Whats happening ? i have tried everything.
Re: went from 4.2.27 -> 4.2.32 SMB sharing doesn't work with windows 10
Can you attach the screenshot of the error?
Did the file transfer work fine until you updated the system?
Is it normal when you upload files to the USB storage device in TOS > File Manager?
Did the file transfer work fine until you updated the system?
Is it normal when you upload files to the USB storage device in TOS > File Manager?
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: went from 4.2.27 -> 4.2.32 SMB sharing doesn't work with windows 10
Maybe the SMB settings in the Terra Master device were reset after the update. It would be important to check this and select smb 2 to smb 3 for the smb version. If SMB 1 is selected, Windows may refuse to cooperate.
greetings
greetings
TNAS F2-221 - TOS 5
4 GB Ram
2x 4 TB WD Red - Raid 1
4 GB Ram
2x 4 TB WD Red - Raid 1
- sianderson
- Posts: 293
- Joined: 02 Aug 2020, 03:42
Re: went from 4.2.27 -> 4.2.32 SMB sharing doesn't work with windows 10
F2-210
4.2.43
4.2.43