How to mount hard disks on F2-NAS2/F2-NAS21/F4-NAS/F4-NAS11?

Hard Drive, volume, storage pool, RAID
Post Reply
User avatar
TMzethar
TerraMaster Team
Posts: 1128
Joined: 27 Oct 2020, 16:43

How to mount hard disks on F2-NAS2/F2-NAS21/F4-NAS/F4-NAS11?

Post by TMzethar »

After the device shows that it has entered initialization, it needs to mount the hard disk. The steps are as follows:
1. Shut down and remove all hard disks;
2. Start the empty machine and enter the initialization page;
3. Start the PUTTY program, enter the IP address of the NAS, select "telnet", and click "open";
PUTTY download address:https://dl.terra-master.com/en/NAS/putty.exe
putty.png
4. Enter the user name root and password admin (please note: the password is not displayed, just press Enter after the input is complete)
username.png
username.png (8.88 KiB) Viewed 2079 times
password.png
password.png (17.96 KiB) Viewed 2079 times
5. Keep the N device powered on and insert all hard disks
6. After the hard disk indicator is on, enter the mount command
1) If the hard disk has formed a RAID array, please enter the following command (press Enter after each line)

Code: Select all

mdadm -A /dev/md0 /dev/sd[a-z]2 --force
mdadm -A /dev/md9 /dev/sd[a-z]1 --force
/usr/init.d/userspace
/usr/init.d/dataspace
2) If it is a single mode, and there is only one disk

Code: Select all

mdadm -A /dev/md0 /dev/sda2 --force
mdadm -A /dev/md9 /dev/sda1 --force
/usr/init.d/userspace
/usr/init.d/dataspace
3) If it is single mode, and need to mount two hard disks

Code: Select all

mdadm -A /dev/md0 /dev/sda2 --force
mdadm -A /dev/md0 /dev/sdb2 --force
mdadm -A /dev/md9 /dev/sd[a-z]1 --force
/usr/init.d/userspace
/usr/init.d/dataspace
4) If it is single mode, and need to mount three hard disks

Code: Select all

mdadm -A /dev/md0 /dev/sda2 --force
mdadm -A /dev/md0 /dev/sdb2 --force
mdadm -A /dev/md0 /dev/sdc2 --force
mdadm -A /dev/md9 /dev/sd[a-z]1 --force
/usr/init.d/userspace
/usr/init.d/dataspace
5) If it is single mode, and need to mount four hard disks

Code: Select all

mdadm -A /dev/md0 /dev/sda2 --force
mdadm -A /dev/md0 /dev/sdb2 --force
mdadm -A /dev/md0 /dev/sdc2 --force
mdadm -A /dev/md0 /dev/sdd2 --force
mdadm -A /dev/md9 /dev/sd[a-z]1 --force
/usr/init.d/userspace
/usr/init.d/dataspace
If the above methods cannot successfully mount the hard disk, please replace the host or hard disk!
To contact our team, please send email to following addresses, remember to replace (at) with @:
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Post Reply