Will it become inaccessible even when the second hard disk is not used?
ralexlaptop wrote: ↑02 Jan 2022, 01:28 I was finally able to make some progress. After not getting any responses that provided a solution from Support or the Forum ( viewtopic.php?f=76&t=1455&p=15449#p15449 ), I decided to take the unit apart. It appeared that some of the solder joints maybe cold so I used a hot air gun to heat the circuit board. After doing that, I actually started getting different symptoms. The HDD lights turned off, the lights in the LAN ports (in the rear) came on even though the LAN lights in the front panel did not. If I plugged only one HDD into the F2-420, the HDD light would turn green. After a short wait, I was able to log into the web port. Once everything stabilized with the one hard drive, I shut the unit down from the web interface. I installed the second hard drive and turned the unit back on. I logged back into the web and both hard drives were reporting with a Good or Healthy status. In less than 30 minutes of everything looking normal, the unit went unresponsive. When I turned the unit off and back on again, I'm now back to the original problem, both HDD lights stay red and I have no LAN light in the front or the back and it doesn't matter if the hard drives are inserted or not.