Initboot update required for high memory usage

New system installation, system re-install
Post Reply
User avatar
TMSupport
TerraMaster Team
Posts: 2314
Joined: 13 Dec 2019, 15:15

Initboot update required for high memory usage

Post by TMSupport »

Instruction

As for the high memory usage issue, Initboot update is required. Please follow the instructions below to release the memory.

Applicable model: F2-210 / F4-210

Download link:
For 1GB Memory model:
http://dl.terra-master.com/cn/firmware.img
For 2GB Memory model:
http://dl.terra-master.com/en/firmware.img

Instructions:
1. please download the suitable file;
2. SSH login to access your TNAS as root, the password is the same as admin’s password;
3. enter the command ter_wget and the correct download link such as:
ter_wget http://dl.terra-master.com/cn/firmware.img
4. when the download is completed please execute
cp firmware.img / tmp /
5. input cmd up.sh and press enter;
6. wait for about 5-10 minutes until it displays [root@TNAS-00129F ~]#
7. reboot TNAS.

Notes:
1. It will take 5 – 10 minutes , do not power it off until it completes.
2. The transcoding feature of multimedia server would be affected and it could not be used after memory release.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Post Reply