rightLANE wrote:
> So if I have 4.2.13 installed, am I allowed to just install 4.2.09 over it?
BTW, I do want to keep TOS updated, just with everything I've read, I'm very reluctant to. I use my NAS primarily for Plex so it's hard to justify upgrading if I'm going to loose this ability.
How to reinstall TOS for your TNAS?
Re: How to re-install your TOS?
sngillis wrote:
> I've done this twice now on my F4-210 and at no point in this process am I
> presented with an option to install a new OS. It merely loads the 4.1.32
> version of TOS. When I click 'login', I go to the TOS desktop.
>
> How do I get the new OS loaded?
>
> PS I tried to simply update to 4.2.07 and it keeps hanging at the unzipping
> stage (it says it needs two minutes, but 2 hours later, it still needs two
> minutes).
Same here
> I've done this twice now on my F4-210 and at no point in this process am I
> presented with an option to install a new OS. It merely loads the 4.1.32
> version of TOS. When I click 'login', I go to the TOS desktop.
>
> How do I get the new OS loaded?
>
> PS I tried to simply update to 4.2.07 and it keeps hanging at the unzipping
> stage (it says it needs two minutes, but 2 hours later, it still needs two
> minutes).
Same here
Re: How to re-install your TOS?
{L_BUTTON_AT}rightLANE
To contact our tech team, please email to support(at)terra-master.com, remember to replace (at) with @
Re: How to re-install your TOS?
{L_BUTTON_AT}SquarePeg
To contact our tech team, please email to support(at)terra-master.com, remember to replace (at) with @
Re: How to re-install your TOS?
{L_BUTTON_AT}rightLANE
> > If you have installed the 4.2.13 TOS system, you cannot install 4.2.09.
> Only one system can be run.
So if I want to downgrade, I'd have to follow method 2, then upgrade to the version I want to be on?
Re: How to re-install your TOS?
I have done option 1, the NAS is running but I can't access the login-page. The TNAS PC App found the NAS correctly.
Immediately HELP please !!!
Immediately HELP please !!!
Re: How to re-install your TOS?
donsenilo wrote:
> I have done option 1, the NAS is running but I can't access the login-page.
> The TNAS PC App found the NAS correctly.
> Immediately HELP please !!!
Chrome writes "ERR_CONNECTION_REFUSED"
> I have done option 1, the NAS is running but I can't access the login-page.
> The TNAS PC App found the NAS correctly.
> Immediately HELP please !!!
Chrome writes "ERR_CONNECTION_REFUSED"
Re: How to re-install your TOS?
What's your TNAS model number?
Please try with option 2.
Please try with option 2.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
- AlbertoGon
- Posts: 6
- Joined: 29 Aug 2021, 01:15
Re: How to re-install your TOS?
I have to change the hard disk in terramaster F5-221 where TOS is installed because I have run out of space, I have followed the instructions and when I go to point 7 and I give it to update and restore it restarts but it does not start, it only appears on the screen cannot touch /tmp/databack/complete : no such file or directory.
Can you please help me
Thank you
TMroy wrote:
> [b]Instruction[/b]
>
> Applicable model: All TNAS models
>
> If you wish to re-install the TOS system, or your TNAS encounters a failure and needs
> to reinstall TOS, please refer to the following guidelines:
>
> [b]Method 1: If your TOS system is still working[/b]
>
> 1. Log in to TOS and go to [b]TOS Desktop> Control Panel> General Settings>
> Update and Restore> Backup and Restore[/b];
>
> control panel.png
>
> 2. Tick "Backup system configuration" to back up your system configuration;
>
> backup config.png
>
> 3. Go to [b]TOS Desktop> Control Panel> General Settings> Update and
> Restore> Restore to Factory Default[/b];
>
> restore factory default.png
>
> 4. Tick "Restore to factory default", and then click "Apply";
> your system will be erased, but the data on the hard drives will not be deleted;
> 5. Refresh the browser page, and follow guide on the page to install a new TOS;
> 6. If the page refresh fails, please use TNAS PC to search for your TNAS device; Then
> select the device and click "Login"; Follow the web page to install the new
> TOS;
> 7. After the system installation is complete, log in to TOS and go to [b]TOS
> desktop> Control Panel> General Settings> Update and Restore> Backup and
> Restore[/b] to restore your backed up system configuration.
> restore config.png
>
>
> [b]Method 2: If your TOS system encounters a malfunction and cannot work properly[/b]
>
> 1. Turn off your TNAS device;
> 2. Remove all hard drives;
> 3. Turn on your TNAS;
> 4. Wait about two minutes, after the network light is on, insert your hard drives;
> 5. Use TNAS PC to search for your TNAS device;
> 6. Select the device and click "Login"; Follow the instructions on the web
> page to install the new TOS system.
>
> Note: Reinstalling the system normally will not delete the data on your hard drives,
> BUT to prevent accidents,it is recommanded to backup your data before reinstalling.
> If you have any questions when operating the above steps, please contact us in time.
Can you please help me
Thank you
TMroy wrote:
> [b]Instruction[/b]
>
> Applicable model: All TNAS models
>
> If you wish to re-install the TOS system, or your TNAS encounters a failure and needs
> to reinstall TOS, please refer to the following guidelines:
>
> [b]Method 1: If your TOS system is still working[/b]
>
> 1. Log in to TOS and go to [b]TOS Desktop> Control Panel> General Settings>
> Update and Restore> Backup and Restore[/b];
>
> control panel.png
>
> 2. Tick "Backup system configuration" to back up your system configuration;
>
> backup config.png
>
> 3. Go to [b]TOS Desktop> Control Panel> General Settings> Update and
> Restore> Restore to Factory Default[/b];
>
> restore factory default.png
>
> 4. Tick "Restore to factory default", and then click "Apply";
> your system will be erased, but the data on the hard drives will not be deleted;
> 5. Refresh the browser page, and follow guide on the page to install a new TOS;
> 6. If the page refresh fails, please use TNAS PC to search for your TNAS device; Then
> select the device and click "Login"; Follow the web page to install the new
> TOS;
> 7. After the system installation is complete, log in to TOS and go to [b]TOS
> desktop> Control Panel> General Settings> Update and Restore> Backup and
> Restore[/b] to restore your backed up system configuration.
> restore config.png
>
>
> [b]Method 2: If your TOS system encounters a malfunction and cannot work properly[/b]
>
> 1. Turn off your TNAS device;
> 2. Remove all hard drives;
> 3. Turn on your TNAS;
> 4. Wait about two minutes, after the network light is on, insert your hard drives;
> 5. Use TNAS PC to search for your TNAS device;
> 6. Select the device and click "Login"; Follow the instructions on the web
> page to install the new TOS system.
>
> Note: Reinstalling the system normally will not delete the data on your hard drives,
> BUT to prevent accidents,it is recommanded to backup your data before reinstalling.
> If you have any questions when operating the above steps, please contact us in time.
Re: How to re-install your TOS?
Hello,
I followed the process: started without any HD, once connected to the web intrerface I inserted the disk and got the prompt to "Initialize"
Everything is working, but I can't see my old partitions with data. The System reports the space as used but I can't access it.
How can I recover the partitions? I can't lose that data, it's important.
Thanks in advance
I followed the process: started without any HD, once connected to the web intrerface I inserted the disk and got the prompt to "Initialize"
Everything is working, but I can't see my old partitions with data. The System reports the space as used but I can't access it.
How can I recover the partitions? I can't lose that data, it's important.
Thanks in advance