Drives not mounting on Ventura 13.2

RAID storage for video editing professionals or who care much about the speed
Post Reply
User avatar
kazrak
Posts: 2
Joined: 27 Jan 2023, 12:04

Drives not mounting on Ventura 13.2

Post by kazrak »

I recently set up a new D5 on a Mac Studio running Ventura 13.1. Everything was working fine, until I updated to 13.2.

Since the update, the D5 appears to work perfectly, and RAID Manager Pro shows it with no problems. However, the system does not see any disks provided by it. Disk Utility shows no disks; neither does diskutil on the command line. The device shows up properly in system_profiler as a Thunderbolt device, but no storage devices are associated with it.

I tested on an M1 MacBook Pro running 13.1, and the drives come up without any problem there.

I have tried fully uninstalling and reinstalling the driver with no success. I've gone in and verified that the system is set to allow kexts to be loaded. kextstat shows version 4.24.0.

Am I missing something obvious?
User avatar
kazrak
Posts: 2
Joined: 27 Jan 2023, 12:04

Re: Drives not mounting on Ventura 13.2

Post by kazrak »

Apparently, it was specific to 13.2, because the 13.2.1 update fixed the issue.
User avatar
TMroy
TerraMaster Team
Posts: 2578
Joined: 10 Mar 2020, 14:04
China

Re: Drives not mounting on Ventura 13.2

Post by TMroy »

Yes, Apple needs to fix its own issues.
To contact our team, please send email to following addresses, remember to replace (at) with @:
Support team: support(at)terra-master.com (for technical support only)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Post Reply