Transmission configurations are lost after restart

Transmission, qBittorrent, Aria 2 download applications
Locked
User avatar
zedidas
Posts: 2
Joined: 22 Dec 2021, 06:46

Transmission configurations are lost after restart

Post by zedidas »

I've installed transmission and configured it using the transmission UI.

However, if I try to stop and start transmission in the TNAS Applications window, after restart, the transmission configurations are lost and the default values are shown.

I would expect that stoping and starting transmission through the Applications window should not have any effect on the configurations. How can I make sure that the configurations are not lost?

I already tried several times to uninstall and reinstall transmission, using diferrente configurations but the result is always the same.

Model: F4-210
TOS version: 4.2.17-2110301418
Transmission version: 2.95-200810

Thanks!
User avatar
TMSupport
TerraMaster Team
Posts: 2314
Joined: 13 Dec 2019, 15:15

Re: Transmission configurations are lost after restart

Post by TMSupport »

Thanks for your feedback, we will verify it soon.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
User avatar
zedidas
Posts: 2
Joined: 22 Dec 2021, 06:46

Re: Transmission configurations are lost after restart

Post by zedidas »

Hello,

Do you have an update on this issue?

I have installed new drives into the NAS so that I could have a clean install. Unfortunately, the problem still occurs.

Thank you.
Locked