Hi everyone,
I am constantly having problems with Plex on Terarmaster (F4-220), as has widely been discussed on these forums. I'm really tired of having to uninstall and re-install Plex, re-add libraries etc. I have found no solution and neither Terramaster nor Plex have been much help.
I have heard Plex in Docker works well, but I am completely new to Docker and have limited working knowledge of these sorts of applications and coding. I am hoping someone could provide a step by step guide to how to set up and use Plex in Docker.
Any help would be immensely appreciated.
Regards,
Plex in Docker?? - Please Help
-
- Posts: 74
- Joined: 04 Feb 2020, 05:00
Re: Plex in Docker?? - Please Help
This will show you how to enable hardware transcoding in Plex running through docker. It also has a link to the linuxserver dockerhub guide, which is what I followed to when I switched to running Plex through docker. Haven't had to re-add libraries or anything since and it's running flawlessly. If you also setup the watchtower container it will keep your Plex container up to date automatically.
viewtopic.php?t=2236
viewtopic.php?t=2236
- MissionAborted
- Posts: 36
- Joined: 20 Jul 2020, 23:47
Re: Plex in Docker?? - Please Help
Thank you so much sports_wook. I really appreciate you pointing me in the right direction. I currently have Emby installed on all my devices as well, so that is a great backup, but I like the look and feel of Plex better, so am looking forward to running it in docker. Thanks again!
Re: Plex in Docker?? - Please Help
If you use the latest version from the plex website I am finding it rock solid so far
F2-220 WITH 2 x WD RED 2TB RUNNING 4.2.17
- MissionAborted
- Posts: 36
- Joined: 20 Jul 2020, 23:47
Re: Plex in Docker?? - Please Help
deejc - What did you download? There is no download link to Plex for Terramaster on the Plex website. I am currently running the latest plex version available in Terramaster applications and get the same old trouble... "configuring" every two days and I have to uninstall and re-install.
Any help would be appreciated. Thanks
Any help would be appreciated. Thanks
Re: Plex in Docker?? - Please Help
https://www.plex.tv/en-gb/media-server-downloads/
The download is on this page
The download is on this page
F2-220 WITH 2 x WD RED 2TB RUNNING 4.2.17
- MissionAborted
- Posts: 36
- Joined: 20 Jul 2020, 23:47
Re: Plex in Docker?? - Please Help
Thank you so much! I really appreciate the help everyone!
- MissionAborted
- Posts: 36
- Joined: 20 Jul 2020, 23:47
Re: Plex in Docker?? - Please Help
Tried installing from the Plex website (version 1.25.0.5282 - November 2021) but this did not work. As soon as it was installed, I could not open from within TOS, as it would not connect / refused connection. I was given the option to "update" in Terramaster applications, but this actually rolled Plex back to version 1.24.1.4931 (August 2021)
I am now back to uninstalling and re-installing. I appreciate the suggestion deejc. Is there anything else I needed to do to get version 1.25.0.5282 working in TOS?
I am starting to look into the Docker method, but am a little confused so far, as I have very limited experience with coding. Going to give it all a re-read as soon as possible, but if the Plex site installation is easier and equally as stable, I'd probably go that route.
I am now back to uninstalling and re-installing. I appreciate the suggestion deejc. Is there anything else I needed to do to get version 1.25.0.5282 working in TOS?
I am starting to look into the Docker method, but am a little confused so far, as I have very limited experience with coding. Going to give it all a re-read as soon as possible, but if the Plex site installation is easier and equally as stable, I'd probably go that route.
Re: Plex in Docker?? - Please Help
Not really sure what else you can do except completely remove / uninstall it then try only installing the downloaded version … you’ll probably lose your database tho
F2-220 WITH 2 x WD RED 2TB RUNNING 4.2.17
Re: Plex in Docker?? - Please Help
Just to add to this tread, I have just installed Plex on Docker.
These were my steps, for the base install
I then changed the path to my Movies (to my existing path outside of Docker) using the TOS Docker application. (Container - Edit - Volume).
Tip: If you have an existing Plex application running, dont forget to stop it before starting the Docker one
These were my steps, for the base install
- Initiate Docker from the TOS Applications. Do not add the Plex container.
- Start a puTTY session, logging in with your standard credentials
- Use this site for the method to install the Plex container. Literally just run steps 1, 2 and 3 in the puTTY window
https://www.smarthomebeginner.com/insta ... ng-docker/
I then changed the path to my Movies (to my existing path outside of Docker) using the TOS Docker application. (Container - Edit - Volume).
Tip: If you have an existing Plex application running, dont forget to stop it before starting the Docker one
Bikers know why dogs stick their head out the window.
TNAS F5-221
TOS 4.2.39-2203011626
3X WD RED PLUS 3TB (RAID5)
2X WD Green 2TB (RAID1)
1X WD 4TB USB
TNAS F5-221
TOS 4.2.39-2203011626
3X WD RED PLUS 3TB (RAID5)
2X WD Green 2TB (RAID1)
1X WD 4TB USB