[ SurveillanceMotion ] Surveillance software
[ SurveillanceMotion ] Surveillance software
About :
Last version: 1.01.00
Applicable models: TerraMaster x.64 series
Applicable TOS4: 4.1.27 or later versions
Applicable TOS5: 5.1.12 or later versions
App download: https://tmnascommunity.eu/download/surveillancemotion
Required packages:
ffmpeg > 4.4.3.0
Python310 > 3.10.5.0
Module WebUI for additional settings can be accesses at :
http(s)://yournasip:port/modules/SurveillanceMotion/www
Include:
motion 4.4.0 - https://motion-project.github.io/
MotionEye WebUI 0.42.1 - https://github.com/ccrisan/motioneye/wiki
How to manully install this app on TerraMaster application store?
About
Motion is a highly configurable program that monitors video signals from many types of cameras.
Set it up to monitor your security cameras, watch birds, check in on your pet, create timelapse videos and more.
Create videos or save pictures of the activity
Passthrough recording from many IP cameras
View live stream of cameras
Invoke scripts when activities occur
Log activity into multiple types of databases
Fully customizable masks for privacy or motion detection
Full tls(https) support with authentication for webcontrol and streams
Use Motion with many types of devices
Network cameras via RTSP, RTMP and HTTP
PI cameras
V4L2 webcams
Video capture cards
Existing movie files
Re: [ SurveillanceMotion ][ 1.00.00 ] Surveillance software
added initial version 1.00.00
Re: [ SurveillanceMotion ][ 1.00.00 ] Surveillance software
I have installed motioneye on Terramaster f5-221, however the Montioneye service will not start. I have installed Python and ffmpeg.
The motion.log
<br />
<b>Warning</b>: fopen(/mnt/appdata/MOD_CONFIG/SurveillanceMotion/motion.log): failed to open stream: No such file or directory in <b>/usr/www/modules/SurveillanceMotion/www/4.php</b> on line <b>84</b><br />
motioneye.log
<br />
<b>Warning</b>: fopen(/mnt/appdata/MOD_CONFIG/SurveillanceMotion/motioneye.log): failed to open stream: No such file or directory in <b>/usr/www/modules/SurveillanceMotion/www/5.php</b> on line <b>84</b><br />
Looking in AppData/MOD_CONFIG/SurveillanceMotion/ there is no WWW folder.
Is there something else I need to install?
The motion.log
<br />
<b>Warning</b>: fopen(/mnt/appdata/MOD_CONFIG/SurveillanceMotion/motion.log): failed to open stream: No such file or directory in <b>/usr/www/modules/SurveillanceMotion/www/4.php</b> on line <b>84</b><br />
motioneye.log
<br />
<b>Warning</b>: fopen(/mnt/appdata/MOD_CONFIG/SurveillanceMotion/motioneye.log): failed to open stream: No such file or directory in <b>/usr/www/modules/SurveillanceMotion/www/5.php</b> on line <b>84</b><br />
Looking in AppData/MOD_CONFIG/SurveillanceMotion/ there is no WWW folder.
Is there something else I need to install?
Re: [ SurveillanceMotion ][ 1.00.00 ] Surveillance software
MotionEye service should start and you can access the WebUI to configure your first camera.
motion service will start after the first camera is configured.
The log info is available only if the services were started at least once to create the files.
You need to have these modules installed in advance:
ffmpeg > 4.3.2.0
Python2 > 2.00.00
Pay attention that Python2 requires ModBase1 as described in the post for Python2, so you have to install this one too
ModBase1 > 1.00.07
motion service will start after the first camera is configured.
The log info is available only if the services were started at least once to create the files.
You need to have these modules installed in advance:
ffmpeg > 4.3.2.0
Python2 > 2.00.00
Pay attention that Python2 requires ModBase1 as described in the post for Python2, so you have to install this one too
ModBase1 > 1.00.07
Re: [ SurveillanceMotion ][ 1.00.00 ] Surveillance software
Hi,
Do you intend to develop a version for the armv8 product series ?
If not, do you have an alternative for a surveillance software for the F4-210 product ?
Thank you for your help !
Do you intend to develop a version for the armv8 product series ?
If not, do you have an alternative for a surveillance software for the F4-210 product ?
Thank you for your help !
Re: [ SurveillanceMotion ][ 1.01.00 ] Surveillance software
up to 1.01.00 (motion binary up to 4.4.0)
Re: [ SurveillanceMotion ][ 1.01.00 ] Surveillance software
Hello,
Does this work on F4-220?
I am getting the attached error message when I try to install this. Any help would be great.
Thanks
Does this work on F4-220?
I am getting the attached error message when I try to install this. Any help would be great.
Thanks
- Attachments
-
- 2022-08-07 14_10_55-TOS 5.0.png (6.25 KiB) Viewed 3439 times
Re: [ SurveillanceMotion ][ 1.01.00 ] Surveillance software
It is.
Are you running TOS4 or TOS5 ?
Are you running TOS4 or TOS5 ?
Re: [ SurveillanceMotion ][ 1.01.00 ] Surveillance software
TOS 5
Also my F5-221 has the same issue running TOS 5 also.
Also my F5-221 has the same issue running TOS 5 also.
Re: [ SurveillanceMotion ][ 1.01.00 ] Surveillance software
For the moment the app was not ported to TOS5 and can be installed only on TOS4