services not start automatically

Using Web Server, PHP, MySQL, MariaDB.
Post Reply
User avatar
freddymx
Posts: 3
Joined: 08 Mar 2021, 22:53

services not start automatically

Post by freddymx »

the web server, mariadb and smb services does not start automatically when the NAS is turned on
User avatar
TMRyan
TerraMaster Team
Posts: 817
Joined: 01 Dec 2020, 11:50

Re: services not start automatically

Post by TMRyan »

Hi,
Do you mean that after restarting TNAS, the Web server, mariadb and smb services that have been enabled will no longer be available?
Can you describe the situation that cannot be used? Which version of your TOS is? Which model is your machine?
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement)
User avatar
freddymx
Posts: 3
Joined: 08 Mar 2021, 22:53

Re: services not start automatically

Post by freddymx »

Hi,
my TNAS model F2-210, TOS 4.2.08... No, what happens is that when I restart the TNAS the Webserver, Mariadb and Smb services are turned off and I have to restart them again.
User avatar
TMRyan
TerraMaster Team
Posts: 817
Joined: 01 Dec 2020, 11:50

Re: services not start automatically

Post by TMRyan »

Hi,
Did you do anything before restarting? Under normal circumstances, this problem does not occur.
Can you try to reboot the device again and check the results?
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement)
User avatar
freddymx
Posts: 3
Joined: 08 Mar 2021, 22:53

Re: services not start automatically

Post by freddymx »

I'm using the control panel startup and ignition timing
User avatar
deejc
Posts: 111
Joined: 09 Mar 2021, 03:35

Re: services not start automatically

Post by deejc »

I have seen this also with time-machine and afp, I switched the nas f-2-210 off to move it and when it came back up afp and TM were not active and my Mac could not back up but it was ok and has backed up the previous night
F2-220 WITH 2 x WD RED 2TB RUNNING 4.2.17
User avatar
Roger
Posts: 5
Joined: 01 Dec 2021, 05:50

Re: services not start automatically

Post by Roger »

Hi - I have the same problem.
Is there solution?

Rog
Post Reply