Page 1 of 2

TOS 4.1.29 is released for update

Posted: 22 Jul 2020, 14:41
by TMSupport
TOS 4.1.29 Release Notes

Applicable models:
ARM:
F2-210/F4-210
X.86:
F2-220/F2-420/F4-220/F4-420/F5-420
F2-221/F2-421/F4-221/F5-221/F5-421
F4-422/F5-422

This update includes following bug fixes for the previous version.
1. Fixed the issue of disabled UPnP/Telnet/Bonjour service would be enabled automatically after TNAS reboot;
2. Fixed the issue of the 10th volume could not be seen and used;
3. Fixed the issue of failed downloading at TOS File Manager.


How to install TOS update?
1. Download the update package:
ARM: http://dl.terra-master.com/cn/TOS_A1.0_ ... 201022.bz2
X.86: http://dl.terra-master.com/cn/TOS_S2.0_ ... 171904.bz2
2. Go to TOS> Control Panel> General Settings> Update & Restore, and click “Manual Update”;
3. Click "Browse" to select the update package;
4. Click "Apply";

Issue report:
If you encounter issue during using, please report to TerraMaster official forum “TOS update”.

Re: TOS 4.1.29 is released for update

Posted: 22 Jul 2020, 19:13
by Tricky
Is this a sorted version of the 4.2.01 beta?

Re: TOS 4.1.29 is released for update

Posted: 23 Jul 2020, 23:26
by TMroy
4.1.29 is a new update from 4.1.28.

Re: TOS 4.1.29 is released for update

Posted: 24 Jul 2020, 01:01
by Tricky
TMroy wrote: 23 Jul 2020, 23:26 4.1.29 is a new update from 4.1.28.
Yes i can see that...i was just asking what relation was the new update to the 4.2.1 beta version?

Re: TOS 4.1.29 is released for update

Posted: 24 Jul 2020, 14:40
by scoobyfizz
AFP and FTP were also re-enabled after reboot after this update, but only after the update.

However, now when restarted the SMB/CIFS file service settings are disabled and also the Rsync user id field is being defaulted to rsync after reboot.

F2-210

Re: TOS 4.1.29 is released for update

Posted: 24 Jul 2020, 17:02
by Jonas Pi
For me everything worked fine so far.

- NFS & SMB are still enabled after reboot
- FTP & Telnet are still disabled after reboot.

I was restarting about 3 times.

Thanks for the fix,
if it's not going to work anymore i'll let you know.

Jonas

Re: TOS 4.1.29 is released for update

Posted: 24 Jul 2020, 23:43
by TMroy
Tricky wrote: 24 Jul 2020, 01:01
TMroy wrote: 23 Jul 2020, 23:26 4.1.29 is a new update from 4.1.28.
Yes i can see that...i was just asking what relation was the new update to the 4.2.1 beta version?
There are many features and changes implemented in 4.2, but not in 4.1.28 or 29.

Re: TOS 4.1.29 is released for update

Posted: 29 Jul 2020, 00:32
by Tricky
The restart function odes not work when power goes out happened twice now.

Re: TOS 4.1.29 is released for update

Posted: 29 Jul 2020, 17:36
by Tricky
Re the last comment i thought it was just due to power outs but for the last two nights i have found the F5-221 on the 4.1.29 update has not been visible on the network or via the TNAS screen and requires a restart to get it visible again.

On a side note a friend with the same TNAS has been running the 4.2.02 beta is running with less problems than this update and it actually turns the unit back on after a power out.

Also i am still getting regular like 6 times a day notifications that the CPU has exceeded 90%!

Re: TOS 4.1.29 is released for update

Posted: 31 Jul 2020, 01:40
by brianx87
I'm suffering from high CPU spikes since updaing to 4.1.28 and the same on 4.1.29 and device is failing to follow the custom power schedule

https://imgur.com/a/Y8rmUfY