The F5-221 is expandable from 2GB to 10GB.
Nowhere in the supplied documentation or the online compatibility chart can I find the specifications for compatible RAM upgrades.
I'm looking to expand to the full 10GB.
As such, I would appreciated advice as to the correct RAM to purchase.
Thanks in advance.
F5-221 RAM upgrade Specifications
Re: F5-221 RAM upgrade Specifications
Please search in our Amazon shop. Here is the link for your reference :https://www.amazon.com/dp/B06ZYRJVQ1/re ... UTF8&psc=1
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: F5-221 RAM upgrade Specifications
Hi, I have a related question. There seems to be conflict from different sources on what the actual maximum RAM is thst can be installed. Can you please clarify?
Re: F5-221 RAM upgrade Specifications
No matter what TNAS model, the RAM expansion slot supports up to 8G.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: F5-221 RAM upgrade Specifications
Thanks, so I can go ahead and install DDR3 SDRAM 8GB, 1,600 MHz, 1.35V.
Re: F5-221 RAM upgrade Specifications
So, did you? And did it work out?
- JayBlingham
- Posts: 98
- Joined: 04 Oct 2020, 10:34
Re: F5-221 RAM upgrade Specifications
I can confirm that I installed an 8GB SODIMM DDR3L 1600Mhz into my F5-221 and it has been working flawlessly. I actually had one lying around from an old laptop.
Jay
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------
Re: F5-221 RAM upgrade Specifications
Sorry to be the bearer of bad news but the processor in the F5-221 cannot address more than 8GB of total ram:
https://ark.intel.com/content/www/us/en ... 5-ghz.html
It won't do any harm, as far as I'm aware, but just be aware that any system ram above 8GB is probably being wasted.
https://ark.intel.com/content/www/us/en ... 5-ghz.html
It won't do any harm, as far as I'm aware, but just be aware that any system ram above 8GB is probably being wasted.
F5-221 TOS 4.2.09 4x4TB Seagate Ironwolf, 1x240GB Ironwolf SSD (Cache)
- JayBlingham
- Posts: 98
- Joined: 04 Oct 2020, 10:34
Re: F5-221 RAM upgrade Specifications
Good to know, thanks DiscoSi. Now I'm going to need to find a way to test that I'm fine if it only actually uses 8GB - the ram I had was just lying around anyway, but it would be fun to test it.
Jay
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------
- JayBlingham
- Posts: 98
- Joined: 04 Oct 2020, 10:34
Re: F5-221 RAM upgrade Specifications
According to this, the system supports up to 16GB of memory - but since the first 2GB are soldered onto the board, the max would be 10GB. I'm not disputing any documentation for the CPU that says otherwise. I'm just reading the output of the dmidecode command in Linux.
[root@tmnas~]# dmidecode -t 16
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x002D, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 2
[root@tmnas~]# dmidecode -t 16
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x002D, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Jay
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------
---------------------------------------
F5-221, 5.0.171-00221
---------------------------------------