Disk size upgrade Raid 1

[epiq]

Thanks, I did it and awaiting for reply.

[Righty01]

Hi
I'm confused here .
I have got raid 1 but want to goto raid 5 but it seems when I add my new drive which makes 3 drives it will stays on raid 1.
What do I need to do to change over to raid 5 .
Cheers
Jas

[TMSupport]

You should select "upgrade RAID" when the new drive was added.

[TOSMC]

Hi!
I have a similar problem too.
I have a F4-220 with 4 Hard Drives of 3 Tb each configured in RAID 10.
Two hard drives give error, so I bought two HDDs of same brand and capacity.
I followed what indicated here:
viewtopic.php?f=25&t=1226&p=6469&hilit=replace#p6469
I changed the first HDD, went in "Storage Pool" but in Volume#1 TOS tell me that "Hard drive is not detected" and "Edit" button isn't available for RAID Rebuild/Repair.

However all the 4 disks (included the new one) are listed in "Hard drive", I also checked the new Hdd (the first one) and it's error free.

Where I'm wrong?

[TMRyan]

Hi,
Is it possible to let our engineer check it remotely? You can send an email to our tech team to confirm it.