HI
I bought the 10Gbe f422, i'm trying to create a LACP link with all the port (2 1Gbe and 10 Gbe) I didnt have a 10Gbe switch for now.
I'm using a 1Gbe switch and the autonegociation for the 10Gbe don't work and do not swap to 1Gigabit (no link detected)
It is possible to create a 3 link agg with all the port ?
Auto Negociation for 10GBE not working
Re: Auto Negociation for 10GBE not working
It's not suggested to create link aggregation with all 3 ports including 10Gbe port. It's better to create link aggregation with 2 1Gbe network ports.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
- Charlie_Croker
- Posts: 105
- Joined: 07 Oct 2020, 19:05
Re: Auto Negociation for 10GBE not working
There would be no benefit from what you propose even if it was possible, (It's not possible to use different speed links for Link Aggregation, https://www.juniper.net/documentation/e ... interfaces)
Ex Terramaster user. British citizen, Ex resident of KSA, USA and now in UAE.
Re: Auto Negociation for 10GBE not working
Thank's for the reply.
Yes I know that I cannot use 1 10Gbe port in link aggregation with 1 Gig ports. I wanted to do it by forcing the speed to 1gbit / s on the 10Gbe port
Yes I know that I cannot use 1 10Gbe port in link aggregation with 1 Gig ports. I wanted to do it by forcing the speed to 1gbit / s on the 10Gbe port