After change of ip, no more access and not detected by tnas

IPv4/6, Port, VPN, proxy, SSH, remote access and more.
Locked
User avatar
FL4k
Posts: 2
Joined: 08 Feb 2023, 01:54

After change of ip, no more access and not detected by tnas

Post by FL4k »

I have recently purchased a firewall, which makes me manually change ip addresses, gateways etc...
But when I configure my NAS it is not detected anywhere and I can't access it.
Default ip without firewall : 192.168.1.17-18 After : 192.168.100.17-18
netmask 255.255.255.0
Gateway before: 192.168.1.1 After: 192.168.100.1
I really need help.
If anyones haves an ideas
Thanks
User avatar
sae24
Posts: 11
Joined: 29 Jan 2023, 23:33
Russia

Re: After change of ip, no more access and not detected by tnas

Post by sae24 »

Hi!
Looks like U need set address by DHCP, than, when nas will got correct gateway U may set ip manually. Try to disable firewall for a time, in network settings select DHCP.....
User avatar
FL4k
Posts: 2
Joined: 08 Feb 2023, 01:54

Re: After change of ip, no more access and not detected by tnas

Post by FL4k »

FL4k wrote: 08 Feb 2023, 02:08 I have recently purchased a physical firewall, which makes me manually change ip addresses, gateways etc...
But when I configure my NAS it is not detected anywhere and I can't access it.
Default ip without firewall : 192.168.1.17-18 After : 192.168.100.17-18
netmask 255.255.255.0
Gateway before: 192.168.1.1 After: 192.168.100.1
I really need help.
If anyones haves an ideas
Thanks
Locked