I have F4-422 and try to monitor it via munin. But no luck. I'm try to get:
SystemTemperature 1.3.6.1.4.1.24681.1.2.6
CPU-Temperature 1.3.6.1.4.1.24681.1.2.5
Taken from TERRAMASTER_TNAS_MIB_X86.txt
Is that correct OIDs?
How to find correct OID
Re: How to find correct OID
You can check the temperature of the hardware in the control panel - system info - overview.
To contact our team, please send email to following addresses, remember to replace (at) with @
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Technical team: support(at)terra-master.com (for technical support)
Service team: service(at)terra-master.com (for purchasing, return, replacement, RMA service)
Re: How to find correct OID
When I outside home I'm using Munin Monitoring web page to see what happened in my test network, I need additional moves to open VPN to pass to my home network from outside. Any way, correct snmp answer - good point.
Some standard IODs working good in standad plugins-
snmp__cpuload
snmp__df
snmp__if_
snmp__memory
snmp__processes
snmp__uptime
May be some one have good experience with Temperature sensors (HDD, case, CPU) and Fan RPM?
Thank U.
Some standard IODs working good in standad plugins-
snmp__cpuload
snmp__df
snmp__if_
snmp__memory
snmp__processes
snmp__uptime
May be some one have good experience with Temperature sensors (HDD, case, CPU) and Fan RPM?
Thank U.
Re: How to find correct OID
Hi support!
Is it some info about snmp data about temperatures and fan speed for TOS version 5.1.17-00298?
Is it some info about snmp data about temperatures and fan speed for TOS version 5.1.17-00298?
Re: How to find correct OID
I use the Munin Monitoring web page when I'm away from home to monitor what happened in my test network, but I need to take additional steps to open a VPN so, that I can access my home network from the outside. In any case, good point and a correct SNMP response.Hi support!
Is it some info about snmp data about temperatures and fan speed for TOS version 5.1.17-00298?
Some common IODs function well with common plugins
-\ssnmp cpuload
snmp df \ssnmp if \ssnmp memory \ssnmp processes \ssnmp uptime
Perhaps someone has expertise working with temperature sensors (for the CPU, chassis, and HDD) and fan RPM?
Thank you