TNAS Inialize

Initialization of newly purchased TNAS or re-installation of your TNAS
Post Reply
michaels2408
Posts: 15
Joined: 27 Jan 2020, 14:46

TNAS Inialize

Post by michaels2408 » 09 Sep 2020, 00:05

I am trying to initialize my TNAS F2-210 that had previously worked. Upon booting I have the white startup screen at the base IP4 address 192.168.1.80. they system goes through the drive check without error, then asks if I want to download the software automatically or download and install manually. I have tried both of these options, and on the manual download and install I have tried both the 4.1.27 and the 4.1.30 versions. What happens in the device loads / unzips the package then becomes permanently hung up at 50% done. I have tried this many many times and the results are always the same, except for one time when the device tried to load at 192.168.1.80:8111 and was stuck at the loading graphic. Please help as this was a fully functioning system not but 5 days back .

User avatar
TMSupport
Customer Service
Posts: 587
Joined: 13 Dec 2019, 15:15

Re: TNAS Inialize

Post by TMSupport » 09 Sep 2020, 11:11

As for the mentioned issue, please follow the instructions below to fix it:
1. Ensure the NAS is connected to a router that is connected to internet, ensure the NAS and the computer in the same network segment.
2. Please install the putty client (for Windows users). Fill your NAS IP address in Host Name, 22 as the Port, and click “Open”.
3. Login as “root”, input the password as Admin123, and hit Enter.
4. And then input /etc/tos/scripts/wget_from_online, and hit Enter.
5. please try the reinstallation again.

michaels2408
Posts: 15
Joined: 27 Jan 2020, 14:46

Re: TNAS Inialize

Post by michaels2408 » 10 Sep 2020, 09:03

Instructions followed. Same results. Just will not take the TOS OS.

User avatar
TMSupport
Customer Service
Posts: 587
Joined: 13 Dec 2019, 15:15

Re: TNAS Inialize

Post by TMSupport » 10 Sep 2020, 14:33

Please advise whether it's ok to have a remote session to let our engineer help you, if yes, you can send an email to support(at)terra-master.com to confirm it.

michaels2408
Posts: 15
Joined: 27 Jan 2020, 14:46

Re: TNAS Inialize

Post by michaels2408 » 11 Sep 2020, 04:25


User avatar
TMSupport
Customer Service
Posts: 587
Joined: 13 Dec 2019, 15:15

Re: TNAS Inialize

Post by TMSupport » 11 Sep 2020, 16:37

Please send an email to support(at)terra-master.com with your story to ask for the technical support.

User avatar
enekator
Posts: 2
Joined: 07 Jun 2020, 00:01

Re: TNAS Inialize

Post by enekator » 17 Sep 2020, 04:25

I'm having the same issue here. Any solution?

User avatar
TMSupport
Customer Service
Posts: 587
Joined: 13 Dec 2019, 15:15

Re: TNAS Inialize

Post by TMSupport » 17 Sep 2020, 14:25

Your TOS installation is stuck at 50% too? Please check this post viewtopic.php?f=75&t=840 and follow the instructions.

Post Reply